Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2023PROMASTER 2500REPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEMFUEL DELIVERY, GASMODULE, FUEL PUMPINSTALLATION
2023 Dodge and Ram ProMaster 2500
Module, Fuel Pump: Installation
2023 Dodge and Ram ProMaster 2500SECTION Installation
- Install new fuel pump module O-ring to fuel tank.CAUTION:
The fuel pump module must be installed correctly to prevent damage to the fuel pump module.
- Line up the fuel pump module mounting tab to the arrow on the fuel tank.
- Install fuel pump module lock ring.
- Install fuel pump module lock ring tool and turn clockwise until the fuel pump module lock ring (1) is seated and locked to fuel tank.
(special tool #9340, SAE Fuel Pump Lock Ring Wrench)
- Connect the line quick connects to the fuel pump module.
- Connect electrical connector (4) to fuel pump module.
- Install the fuel pump access cover (1). Tighten the cover screws securely.
- Install the carpet cover (1).
- Install the drivers seat frame cover (1). Tighten the screws securely (2).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.