Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2023 Dodge and Ram Durango GT Premium, AWDFACTORY OEM SERVICE PROCEDURE
3.6L - DTCS P2167 To P258A
- DTC Troubleshooting
- P2167-Accelerator Pedal Position Sensor 2 Maximum Stop Performance
- P2172-High Airflow/Vacuum Leak Detected (Instantaneous Accumulation)
- P2173-High Airflow/Vacuum Leak Detected (Slow Accumulation)
- P2174-Low Airflow/Restriction Detected (Instantaneous Accumulation)
- P2181-Cooling System Performance
- P219A-Air-Fuel Ratio Cylinder Imbalance Bank 1
- P219B-Air-Fuel Ratio Cylinder Imbalance Bank 2
- P2271-O2 Sensor 1/2 Signal Biased Rich
- P2273-O2 Sensor 2/2 Signal Biased Rich
- P2299-Brake Pedal Position/Accelerator Pedal Position Incompatible
- P2302-Ignition Coil 1 Secondary Circuit - Insufficient Ionization
- P2305-Ignition Coil 2 Secondary Circuit - Insufficient Ionization
- P2308-Ignition Coil 3 Secondary Circuit - Insufficient Ionization
- P2311-Ignition Coil 4 Secondary Circuit - Insufficient Ionization
- P2314-Ignition Coil 5 Secondary Circuit - Insufficient Ionization
- P2317-Ignition Coil 6 Secondary Circuit - Insufficient Ionization
- P2457-Exhaust Gas RECIRCULATION Cooling System Performance
- P232A-TCM Request Forced Engine Shutdown
- P2503-Charging System Output Low
- P2504-Charging System Output High
- P257E-Engine Hood Switch Circuit Low
- P257F-Engine Hood Switch Circuit High
- P258A-Electric Vacuum Pump Circuit
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.