2017 Dodge and Ram Viper BaseFACTORY OEM SERVICE PROCEDURE

Torque Specifications

DESCRIPTION N.m Ft. Lbs. In. Lbs.
Nut, Accessory Drive Belt Tensioner 41 30 -
Bolts, A/C Condenser to Radiator 5 - 45
Bolts, Coolant Pressure Bottle 5 - 40
Bolts, Cooling Fans Shroud 11 - 95
Bolt, Idler Pulley 54 40 -
Bolts, Radiator Mounting 11 - 95
Bolts, Thermostat Housing 12 - 106
Bolts, Water Pump 12 - 106
Screw, Air Bleed 9 - 80
Sensor, Coolant Temperature 20 15 -
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.