Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2017 Dodge and Ram Viper BaseFACTORY OEM SERVICE PROCEDURE
Radiator, Engine Cooling: Installation
- Care should be taken not to damage radiator cooling fins during installation.Β Install radiator into position. The lower rubber isolators must rest in the holes in the bottom of the radiator support.
- Install the A/C condenser mounting bolts (2). Tighten A/C condenser mounting fasteners to 5 N.m (45 in. lbs.).
- Install the radiator mounting bolts (1). Tighten bolts to 11 N.m (95 in. lbs.).
- Install the cooling fan assembly (4). Tighten fasteners to 11 N.m (95 in. lbs.). Refer to FAN, COOLING, ELECTRIC, INSTALLATIONΒ .
- Connect the lower radiator hose (1).
- Connect the upper radiator hose (2).
- Install the oil cooler mounting fasteners (1 and 3). Tighten the fasteners to 6 N.m (53 in. lbs.).
- Install the air cleaner housing assembly (1), connect the throttle body air inlet hose. Refer to BODY, AIR CLEANER, INSTALLATION .
- Fill the cooling system with coolant. Refer to FILLING COOLING SYSTEMΒ .
- Operate the engine until it reaches normal operating temperature. Check the cooling system for correct fluid level.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
