2010 Dodge and Ram Caliber ExpressFACTORY OEM SERVICE PROCEDURE

Transmission Fluids: Notes

Mopar ® CVT+4 is required in the CVT automatic transaxles.

Mopar ® CVT+4 when new is green in color. As the vehicle is driven, the ATF will begin to look darker in color and may eventually become brown. This is normal.  A dark brown/black fluid accompanied with a burnt odor and/or deterioration in shift quality may indicate fluid deterioration or transmission component failure.

BG6 and T355 Manual transaxles require the use of Mopar ® ATF+4 (Automatic Transmission Fluid).

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.