Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Dodge and Ram Neon SE, StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.00 OZS. | 0.17 L | PAG 46 | S | |||
| Air Cond Refrigerant | N/A | N/A | R-134a | For further details see "Air conditioner specification label". | S | ||
| Automatic Transmission Fluid | Overhaul,w/Torque Converter Empty | 8.60 QTS. | 8.13 L | Automatic Transmission Fluid Plus 4 or equivalent | S | ||
| Automatic Transmission Fluid | Service Fill | 4.00 QTS. | 3.78 L | Automatic Transmission Fluid Plus 4 or equivalent | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | If DOT 3 Brake Fluid is not available, then DOT 4 or DOT4+ is acceptable. | S | ||
| Engine Coolant | 6.50 QTS. | 6.15 L | MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | 4.50 QTS. | 4.25 L | API - SAE 5W-20 | S | |||
| Fuel Tank | 12.50 GALS. | 47.31 L | S | ||||
| Manual Transmission Fluid | 2.60 QTS. | 2.46 L | Automatic Transmission Fluid Plus 4 | Includes: 4 oz. of Limited-Slip Additive. | S | ||
| Power Steering Fluid | N/A | N/A | Automatic Transmission Fluid Plus 4 or equivalent | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
