Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Dodge and Ram ViperFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.00 OZS. | 0.17 L | PAG 46 | S | |||
| Air Cond Refrigerant | N/A | N/A | R-134a | For further details see "Air conditioner specification label". | S | ||
| Brake Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | S | |||
| Differential Gear Oil | Rear Axle | 45.00 OZS. | 1.33 L | SAE 75W-85 Synthetic Manual Transmission Oil | Add 4 oz. of Friction Modifier. | S | |
| Engine Coolant | 16.00 QTS. | 15.14 L | Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | w/Filter | 11.00 QTS. | 10.4 L | API - SAE 10W-30 | Use oil that has been certified by the American Petroleum Institute. | S | |
| Fuel Tank | 19.00 GALS. | 71.92 L | S | ||||
| Manual Transmission Fluid | 4.00 QTS. | 3.78 L | Castrol Syntorq LT 75W, 85W | S | |||
| Power Steering Fluid | 21.00 OZS. | 0.62 L | Power Steering Fluid (MS5931) | Refer to Chrysler's TSB No. 19-005-03. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.