Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Dodge and Ram Intrepid ESFACTORY OEM SERVICE PROCEDURE
Vehicle Speed Warning Chime Problem
Possible Causes:
- Incorrect Country Code Programmed In The Body Control Module
- Body Control Module
Testing
- With the scan tool in Miscellaneous check the BCM country code setting. If the country code is correct, replace the BCM. See BODY CONTROL MODULE under REMOVAL & INSTALLATION. If the country code is incorrect, program the correct country code setting.
NOTE:
The high speed warning chime is for Gulf Coast Countries only.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.