Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2000RAM 2500 VAN V8-5.2L CNG VIN TREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINETIMING COMPONENTSSYSTEM SPECIFICATIONS
2000 Dodge and Ram RAM 2500 Van V8-5.2L CNG VIN T
System Specifications
2000 Dodge and Ram RAM 2500 Van V8-5.2L CNG VIN TSECTION System Specifications
Camshaft Sprocket Bolt 68 Nm (50 ft. lbs.)
Camshaft Thrust Plate Bolts 24 Nm (210 in. lbs.)
Timing Chain Case Cover Bolts 41 Nm (30 ft. lbs.)
Crankshaft Pulley Bolts 24 Nm (210 in. lbs.)
Camshaft Thrust Plate Bolts 24 Nm (210 in. lbs.)
Timing Chain Case Cover Bolts 41 Nm (30 ft. lbs.)
Crankshaft Pulley Bolts 24 Nm (210 in. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.