Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSDODGE AND RAM2000RAM 2500 VAN V8-5.2L CNG VIN TREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEOIL PUMP, ENGINESERVICE SPECIFICATIONS
2000 Dodge and Ram RAM 2500 Van V8-5.2L CNG VIN T
Service Specifications
2000 Dodge and Ram RAM 2500 Van V8-5.2L CNG VIN TSECTION Service Specifications
| Clearance Over Rotors | 0.0015 |
| Inner Rotor Thickness | 0.825 |
| Outer Rotor Clearance | 0.014 |
| Outer Rotor Diameter | 2.469 |
| Outer Rotor Thickness | 0.825 |
| Tip Clearance Between Rotors | 0.008 |
| Oil Pump-Attaching Bolts | 30 |
| Oil Pump Cover-Bolts | 95 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.