Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
DTC P0137: 1/2 O2 Sensor Shorted To Ground: Description
1/2 Heated Oxygen Sensor (HO2S) voltage is monitored after ignition is turned off and 1/2 HO2S cools down, and after the next time ignition is turned on, provided engine coolant temperature is less than 98°F (37°C) and ambient/battery temperature is within plus or minus 27°F (3°C) of engine coolant temperature. DTC will set in Powertrain Control Module (PCM) memory when PCM senses 1/2 HO2S voltage is less than .156 volt for 28 seconds after engine is started. Possible causes for DTC to set are: defective 1/2 HO2S, defective PCM, defective connectors or defective wiring.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.