Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Daewoo Leganza CDXFACTORY OEM SERVICE PROCEDURE
Wheel Alignment Specifications
WHEEL ALIGNMENT SPECIFICATIONS
| Application | Preferred | Range | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Lanos | |||||||||
| Camber (1) | |||||||||
| Front | -1° 10' to 20' | ||||||||
| Rear | -2° 10' to -1° 10' | ||||||||
| Caster (1) | |||||||||
| Manual Steering | 30' to 2° 30' | ||||||||
| Power Steering | 1° 45' to 3° 45' | ||||||||
| Toe-In (2-Person Load) (2) | |||||||||
| Front | -10' to 10' | ||||||||
| Rear | -10' to 40' | ||||||||
| Difference Between Left And Right | |||||||||
| Camber | |||||||||
| Front | 1° Max | ||||||||
| Rear | 30' Max | ||||||||
| Caster | 1° Max | ||||||||
| Toe-In (Rear) | 15' Max | ||||||||
| Leganza | |||||||||
| Camber (1) | |||||||||
| 1999-2000 | |||||||||
| Front | -0.2° | +/- 1° | |||||||
| Rear | -0.8° | +/- 1° | |||||||
| 2001 | |||||||||
| Front | -12' | +/- 1° | |||||||
| Rear | -48' | +/- 1° | |||||||
| Caster (1) | 3.0° | +/- 1° | |||||||
| Toe-In At Each Wheel (2-person load)(2) | |||||||||
| 1999-2000 | |||||||||
| Front | -0.1° (-0.6 mm) | +/- 0.08° (0.5 mm) | |||||||
| Rear | 0.16° (1 mm) | +/- 0.086° (0.5mm) | |||||||
| 2001 | |||||||||
| Front | -6' | +/- 4.8' | |||||||
| Rear | 9.6' | +/- 4.8' | |||||||
| Difference Between Left And Right | |||||||||
| Camber | |||||||||
| Front | 1° Max | ||||||||
| Rear | 30' Max | ||||||||
| Caster | 1° Max | ||||||||
| Toe-In (Rear) | 15' Max | ||||||||
| Nubira | |||||||||
| Camber (1) | |||||||||
| Front | -24' | +/- 45' | |||||||
| Rear | -50" | +/- 45' | |||||||
| Caster (1) | 3° | +/- 45' | |||||||
| Toe-In (2-Person Load) (2) | |||||||||
| Front | 0° | +/- 10' | |||||||
| Rear | |||||||||
| 1999 | 3' | +/- 45' | |||||||
| 2000-01 | 0° 7' | +/- 10' | |||||||
| Difference Between Left And Right | |||||||||
| Camber | |||||||||
| Front | 1° Max | ||||||||
| Rear | 30' Max | ||||||||
| Caster | 1° Max | ||||||||
| Toe-In (Rear) | 15' Max | ||||||||
|
|||||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.