Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2025 Chrysler VoyagerFACTORY OEM SERVICE PROCEDURE
Torque Specifications
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Driver or Passenger Knee Air Bag Mounting Screws | 8 | - | 71 | |
| Front Impact Sensor Screw | 11 | - | 98 | |
| Front Seat Belt Anchor Tensioner/Retractor Mounting Screw | 39 | 29 | - | |
| Front Seat Belt Buckle Mounting Screw | 40 | 30 | - | |
| Front and Second Row Height Adjuster To Pillar Screw - Bottom | 39 | 29 | - | |
| Front and Second Row Height Adjuster To Pillar Screw - Top | 40 | 35 | - | |
| Front and Second Row Seat Belt Turning Loop To Height Adjuster Nut | 39 | 29 | - | |
| Occupant Restraint Controller Mounting Nuts | 9 | - | 80 | |
| Passenger Air Bag Mounting Screws | 9 | - | 80 | |
| Second Row Bench Seat Belt Buckle Mounting Nut | 65 | 48 | - | |
| Second Row Center Seat Belt Roof Turning Loop Mounting Screw | 39 | 29 | - | |
| Second Row Seat Belt Buckle Mounting Bolts | 55 | 41 | - | |
| Second and Third Row Outboard Seat Belt Retractor to Pillar Mounting Screws | 39 | 29 | - | |
| Second and Third Row Outboard Seat Belt Lower Anchor To Body Mounting Screws | 39 | 29 | - | |
| Second and Third Row Center Seat Belt Roof Mounted Retractor Nuts | 45 | 33 | - | |
| Side Air Bag Inflatable Curtain Mounting Nuts | 6 | - | 53 | |
| Side Impact Sensor To B-Pillar Screw | 8 | - | 71 | |
| Side Impact Sensor To C-Pillar Screw | 8 | - | 71 | |
| Side Impact Sensor To D-Pillar Screw | 8 | - | 71 | |
| Third Row Seat Belt Buckle Mounting Bolts and Nuts | 50 | 37 | - | |
| Third Row Seat Belt Turning Loop To Pillar Mounting Screw | 48 | 35 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.