Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2025 Chrysler VoyagerFACTORY OEM SERVICE PROCEDURE
Capacities And Recommended Fluids: Specifications
3.6L ENGINE
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Engine Oil With Filter | 5 Quarts / 4.7 Liters | We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. | 68218950AB | 68218950GA |
| Cooling System * | 13.1 Quarts / 12.4 Liters - Standard Duty Cooling | We recommend you use MOPAR Antifreeze/Coolant 10 Year/150, 000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. | 68163848AB | 68163848GB |
| 13.4 Quarts / 12.7 Liters - Heavy Duty Cooling | ||||
| Fuel Selection | 19 Gallons / 71 Liters | 87 Octane (R+M)/2 Method, 0-15% Ethanol (Do not use E-85). | - | - |
| Spark Plugs | GAP | We recommend you use MOPAR Spark Plugs. | - | - |
| 0.043 in / 1.1 mm | - | - | ||
| * Includes heater and coolant reservoir filled to MAX level. | ||||
A/C REFRIGERANT SYSTEM
| Description | Charge Amounts | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| A/C System | Refrigerant Single A/C System - 1.34 lb (624g) Dual A/C System - 1.87 lb (850g) |
Use only refrigerant R-1234yf | 68224028AB | 68224028GA |
| Compressor Oil Single A/C System - 4.73 oz / 140 ml Dual A/C System - 6.42 oz / 190 ml |
Use only PAG oil PSD-1 | 68232939AB | - |
TRANSMISSION
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| 948TE Service Fill | 6.35 Quarts / 6.0 Liters | Use only MOPAR ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. | 68218925AA | 68218925GA |
| 948TE Overhaul Fill | Refer to FLUID AND FILTER, STANDARD PROCEDURE . | |||
TRANSFER CASE
| Description | Type | Capacities | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| U.S. | Metric | ||||
| Power Transfer Unit | Axle Lube | As Required | As Required | 68516062AA | - |
CHASSIS SYSTEMS
| Description | Type | Capacities | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| U.S. | Metric | ||||
| Brake Master Cylinder | We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. | N/A | N/A | 04318080AD | 04318080GC |
| One Speed - Rear Differential | 70W-80 Gear Lube | One Speed - As Required | One Speed - As Required | 68227765AA | 68227765GA |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.