Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Chrysler Pacifica Hybrid LimitedFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas/Electric | 7.60 OZS. | 0.22 L | POE ND-OIL 11 | S | ||
| Air Cond Refrigerant | Gas/Electric | 2.00 LBS. | 0.9 KG | R-1234yf | S | ||
| Automatic Transmission Fluid | Trans Mfr CD SI-EVT | 5.30 QTS. | 5.01 L | MOPAR ZF 8 & 9 Speed Automatic Transmission Fluid, or equivalent | S | ||
| Brake Fluid | N/A | N/A | MOPAR DOT 3 Brake Fluid, SAE J1703 | If DOT 3 Brake Fluid is not available, then DOT 4 is acceptable. | S | ||
| Engine Coolant | Hybrid Limited,Hybrid Pinnacle,Hybrid Touring,Hybrid Touring | Battery Coolant | 5.00 QTS. | 4.73 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S |
| Engine Coolant | Hybrid Limited,Hybrid Pinnacle,Hybrid Touring,Hybrid Touring | Engine Cooling System | 14.50 QTS. | 13.72 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent | S | |
| Engine Coolant | Power Electronics Coolant | 3.70 QTS. | 3.5 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. | S | |
| Engine Oil | 5.00 QTS. | 4.73 L | API - SAE 0W-20 Engine Oil | S | |||
| Fuel Tank | Hybrid Limited,Hybrid Pinnacle,Hybrid Touring,Hybrid Touring | 16.50 GALS. | 62.45 L | S | |||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.