Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2013 Chrysler 200 S, 2D ConvertibleFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.40 OZS. | 0.1 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.00 LBS. | 0.45 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD 62TE | Overhaul | 9.00 QTS. | 8.51 L | MOPAR Automatic Transmission Fluid Plus 4 or equivalent licensed ATF+4 product | Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S |
| Automatic Transmission Fluid | Trans Mfr CD 62TE | Service Fill | 5.50 QTS. | 5.2 L | MOPAR Automatic Transmission Fluid Plus 4 or equivalent licensed ATF+4 product | S | |
| Brake Fluid | N/A | N/A | MORAR Brake Fluid DOT 3, SAE J1703 | If MOPAR Brake Fluid DOT 3 is not available, then MOPAR Brake and Clutch Fluid DOT 4 is acceptable. | S | ||
| Engine Coolant | 3.6L Eng | 11.60 QTS. | 10.97 L | MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent | System fill capacity includes heater and coolant recovery bottle filled to MAX level. Chrysler Material Standard MS-12106. | S | |
| Engine Oil | 3.6L Eng | w/Filter | 6.00 QTS. | 5.67 L | API - SAE 5W-20 | S | |
| Fuel Tank | 3.6L Eng | 16.90 GALS. | 63.97 L | S | |||
| Power Steering Fluid | N/A | N/A | MOPAR Power Steering Fluid Plus 4 | If MOPAR Power Steering Fluid plus 4 is not available, then MOPAR ATF plus 4 Automatic Transmission Fluid is acceptable. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.