Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Chrysler 300 Base, GasFACTORY OEM SERVICE PROCEDURE
Torque Specifications
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Camshaft Position Sensor - Bolt (3.6L) | 8 | - | 71 |
| Camshaft Position Sensor - Bolt (5.7L) | 12 | 9 | - |
| Crankshaft Position Sensor - Bolt (3.6L) | 12 | 9 | - |
| Crankshaft Position Sensor - Bolt (5.7L) | 12 | 9 | - |
| Coolant Temperature Sensor (3.6L/5.7L) | 11 | 8 | - |
| Knock Sensor - Bolt (3.6L) | 23 | 17 | - |
| Knock Sensor - Bolt (5.7L) | 20 | 15 | - |
| Oxygen Sensor (3.6L/5.7L) | 41 | 30 | - |
| Powertrain Control Module - Bolts | 4 | - | 35 |
| Throttle Body - Bolts (3.6L) | 6 | - | 53 |
| Throttle Body - Bolts (5.7L) | 12 | 9 | - |
| Throttle Body Bracket - Bolts (3.6L) | 27 | 20 | - |
| Short Runner Valve - Bolts (5.7L) | 7 | - | 62 |
| Fuel Rail - Bolts (3.6L) | 9 | - | 80 |
| Fuel Rail - Bolts (5.7L) | 11 | 8 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.