Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Chrysler Sebring Convertible V6-3.5LFACTORY OEM SERVICE PROCEDURE
System Specifications
Timing belt tensioner-bolts 28 Nm (250 in. lbs)
Timing belt tensioner pulley assembly-bolt 61 Nm (45 ft. lbs)
Timing belt cover
M6 Bolts 12 Nm (105 in. lbs)
M8 Bolts 28 Nm (250 in. lbs)
M10 bolts 54 Nm (40 ft.lbs)
Right Engine Mount to Timing Cover/Support Bracket 98 Nm (72 Ft. Lbs.)
CRANKSHAFT PULLEY
Crankshaft Damper - Bolt 95 Nm (70 ft. lbs.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.