2009 Chrysler Sebring Convertible V6-3.5LFACTORY OEM SERVICE PROCEDURE

Piston Ring, Engine

PISTON RING GAP

Ring gap-Top Compression Ring 0.20-0.36 mm (0.008-0.014 in.)
Ring gap-2nd Compression Ring (Micro-Napier) 0.20-0.40 mm (0.0078-0.0157 in.)
Ring Gap-Oil Control (steel Rails) 0.25-0.76 mm (0.010-0.030 in.)

PISTON RING SIDE CLEARANCE

Top and Second Compression Ring 0.040-0.080 mm (0.0016-0.0031 in.)
Oil Ring (Steel Rails) 0.038-0.184 mm (0.0015-0.0073 in.)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.