Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Chrysler Sebring Convertible V6-3.5LFACTORY OEM SERVICE PROCEDURE
Connecting Rod, Engine
Diameter 57.982-58.002 mm (2.282-2.283 in.)
Bearing Diametrical Clearance 0.024-0.054 mm (0.0009-0.0021 in.)
Bearing Clearance (Wear Limit) 0.062 mm (0.0024 in.)
Out-of-Round (MAX) 0.007 mm (0.0003 in.)
Diametrical Tapper (MAX) 0.006 mm (0.00025 in.)
Rod Pin Bore Diameter 22.010-22.020 mm (0.8665-0.8669 in.)
Side Clearance 0.39 mm (0.0153 in.)
Total Weight (Less Bearing) 693 grams (24.445 oz.)
Connecting Rod cap - Bolts 27 +1/4 Turn (20 +1/4 Turn)
Bearing Diametrical Clearance 0.024-0.054 mm (0.0009-0.0021 in.)
Bearing Clearance (Wear Limit) 0.062 mm (0.0024 in.)
Out-of-Round (MAX) 0.007 mm (0.0003 in.)
Diametrical Tapper (MAX) 0.006 mm (0.00025 in.)
Rod Pin Bore Diameter 22.010-22.020 mm (0.8665-0.8669 in.)
Side Clearance 0.39 mm (0.0153 in.)
Total Weight (Less Bearing) 693 grams (24.445 oz.)
Connecting Rod cap - Bolts 27 +1/4 Turn (20 +1/4 Turn)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.