Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Chrysler Sebring Convertible V6-2.7LFACTORY OEM SERVICE PROCEDURE
Piston Ring, Engine
PISTON RING GAP
Ring gap-Top Compression Ring 0.20-0.36 mm (0.008-0.014 in.)
Ring gap-2nd Compression Ring 0.37-0.63 mm (0.0146-0.0249 in.)
Ring Gap-Oil Control (steel Rails) 0.25-0.76 mm (0.010-0.030 in.)
PISTON RING SIDE CLEARANCE
Compression Ring-Top 0.035-0.083 mm (0.0013-0.0032 in.)
Compression Ring-Second 0.040-0.080 mm (0.0016-0.0031 in.)
Oil Ring (Steel Rails) 0.058-0.204 mm (0.0022-0.0080 in.)
Ring gap-Top Compression Ring 0.20-0.36 mm (0.008-0.014 in.)
Ring gap-2nd Compression Ring 0.37-0.63 mm (0.0146-0.0249 in.)
Ring Gap-Oil Control (steel Rails) 0.25-0.76 mm (0.010-0.030 in.)
PISTON RING SIDE CLEARANCE
Compression Ring-Top 0.035-0.083 mm (0.0013-0.0032 in.)
Compression Ring-Second 0.040-0.080 mm (0.0016-0.0031 in.)
Oil Ring (Steel Rails) 0.058-0.204 mm (0.0022-0.0080 in.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
