Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Chrysler Sebring Base, 2D Convertible, ED3FACTORY OEM SERVICE PROCEDURE
Ignition Control (Service Information): Specifications: Torque
TORQUE
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| 2.0, 2.4 Camshaft Sensor Screw | 9 | - | 79.5 |
| 2.7, 3.5L Camshaft Sensor Screw | 12 | - | 106 |
| 2.0, 2.4L Ignition coil bolts | 9 | - | 79.5 |
| 2.7L Ignition coil bolts | 7.5 | - | 65 |
| 2.0, 2.4L Spark Plugs | 27 | 20 | - |
| 2.7L Spark Plugs | 18 | 13 | - |
| 3.5L Spark Plugs | 27 | 20 | - |
| Knock Sensor 2.0, 2.4, 2.7L | 10 | 7 | - |
| Knock Sensor 3.5L | 20 | 15 | - |
| Ignition Coil Capacitor Bolt 2.0, 2.4, 2.7L | 10 | - | 88.5 |
| Ignition Coil Capacitor Bolt 3.5L | 28 | 20.5 | - |
| Transmission mounting bolt | 61 | 45 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.