Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Chrysler PT Cruiser L4-2.4LFACTORY OEM SERVICE PROCEDURE
Connecting Rod, Engine
CONNECTING RODS
Connecting Rod Journal Diameter 49.984 - 50.000 mm (1.968 - 1.9685 in.)
Side Clearance 0.13-0.38 mm (0.005-0.015 in.)
Wear Limit 0.40 mm (0.016 in.)
Weight-Total (Less Bearing)
Non-Turbo 565.8 grams (19.96 oz.)
Turbo 663.5 grams (23.4 oz.)
Connecting Rod Cap-Bolts 27 Nm+1/4 turn (20 ft. lbs+1/4 turn)
Connecting Rod Journal Diameter 49.984 - 50.000 mm (1.968 - 1.9685 in.)
Side Clearance 0.13-0.38 mm (0.005-0.015 in.)
Wear Limit 0.40 mm (0.016 in.)
Weight-Total (Less Bearing)
Non-Turbo 565.8 grams (19.96 oz.)
Turbo 663.5 grams (23.4 oz.)
Connecting Rod Cap-Bolts 27 Nm+1/4 turn (20 ft. lbs+1/4 turn)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.