Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Chrysler 300 V6-3.5LFACTORY OEM SERVICE PROCEDURE
Piston, Engine
Piston Dimensions and Clearances
Piston Diameter 95.98 mm ± 0.019 mm (3.7788 in. ± 0.0008 in.)
Clearance at Size Location -0.007 to +0.047 mm (-0.003 to +0.0018 in.)
Piston Ring Groove Diameter #1 87.4-87.6 mm (3.441-3.449 in.)
Piston Ring Groove Diameter #2 86.3-86.5 mm (3.397-3.4055 in.)
Piston Ring Groove Diameter #3 85.8-86.0 mm (3.378-3.385 in.)
Piston Diameter 95.98 mm ± 0.019 mm (3.7788 in. ± 0.0008 in.)
Clearance at Size Location -0.007 to +0.047 mm (-0.003 to +0.0018 in.)
Piston Ring Groove Diameter #1 87.4-87.6 mm (3.441-3.449 in.)
Piston Ring Groove Diameter #2 86.3-86.5 mm (3.397-3.4055 in.)
Piston Ring Groove Diameter #3 85.8-86.0 mm (3.378-3.385 in.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
