2007 Chrysler Pacifica Base, 3.8 LFACTORY OEM SERVICE PROCEDURE

Wipers/Washers DTCS

WIPERS/WASHERS DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description
BCM-B2300 WIPER MODE SWITCH INPUT CIRCUIT PERFORMANCE
BCM-B2301 WIPER MODE SWITCH INPUT CIRCUIT LOW
BCM-B2302 WIPER MODE SWITCH INPUT CIRCUIT HIGH
BCM-B230D REAR WIPER PARK SWITCH INPUT CIRCUIT LOW
BCM-B230E REAR WIPER PARK SWITCH INPUT CIRCUIT HIGH
BCM-B231B REAR WIPER MOTOR CONTROL CIRCUIT LOW
BCM-B231D REAR WIPER MOTOR CONTROL CIRCUIT OPEN
BCM-B232D WASHER SWITCH STUCK
BCM-B232E REAR WASHER SWITCH STUCK
IPM-14 HIGH VOLTAGE DISABLE FRONT AND REAR WASHER
IPM-45 FRONT WASHER OUTPUT SHORT TO GROUND
IPM-46 FRONT WASHER OUTPUT OPEN
IPM-47 REAR WASHER OUTPUT SHORT TO GROUND
IPM-48 REAR WASHER OUTPUT OPEN
IPM-4B FRONT WIPER HILO RELAY OPEN
IPM-4C FRONT WIPER HILO RELAY SHORT TO BATTERY
IPM-55 FRONT WIPER ON RELAY OPEN
IPM-56 FRONT WIPER ON RELAY SHORT TO BATTERY
IPM-62 FRONT WIPER PARK SWITCH OPEN
IPM-63 FRONT WIPER PARK SWITCH SHORT TO GROUND
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.