Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Chrysler PT Cruiser Base, 2D Convertible, AutomaticFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Air Cleaner Lid Screws | 3.9 | - | 35 |
| Crankshaft Position Sensor Mounting Bolts | 8 | - | 70 |
| Engine Coolant Temperature Sensor | 18 | 13.2 | 165 |
| IAC Motor-To-Throttle Body Bolts | 4.5 | - | 40 |
| MAP Sensor | 4.5 | - | 40 |
| Oxygen Sensor | 41 | 30 | - |
| Powertrain Control Module (PCM) Mounting Screws | 4 | - | 35 |
| Throttle Body Mounting Bolts | 11.75 ±4 | - | 105 ±20 |
| Throttle Body Cable Bracket Bolts | 11.75 ±4 | - | 105 ±20 |
| Throttle Position Sensor Mounting Screws | 6.2 | - | 55 |
| Vehicle Speed Sensor Mounting Bolt | 6.8 | - | 60 |
| Crankshaft Position Sensor 1.6L | 10 | - | 90 |
| Fuel Rail bolts 2.0/2.4L | 12 | 8 | - |
| Inlet Air Tube Clamp | 3 | - | 25 |
| Thermostat Housing Bolts 2.4L Turbo | 12.5 | - | 110 |
| Intake Manifold Bolts 2.4L Turbo | 28 | - | 250 |
| Throttle Body Bolts | 12 | - | 105 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.