Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Chrysler 300 SRT-8FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.50 OZS. | 0.16 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.63 LBS. | 0.73 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD NAG1-W5A580 | Overhaul | 8.15 QTS. | 7.71 L | Automatic Transmission Fluid Plus 4 or equivalent | Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. | S |
| Automatic Transmission Fluid | Trans Mfr CD NAG1-W5A580 | Service Fill | 5.30 QTS. | 5.01 L | Automatic Transmission Fluid Plus 4 or equivalent | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | If DOT 3 Brake Fluid is not available, then DOT 4 or DOT4+ is acceptable. | S | ||
| Differential Gear Oil | Front,175mm FIA Axle | 0.63 QTS. | 0.59 L | API - GL-5, SAE 75W-90 Gear Oil or equivalent | S | ||
| Differential Gear Oil | Rear,198mm RII Axle | 1.50 QTS. | 1.41 L | API - GL-5, SAE 75W-140 Synthetic Gear Oil or equivalent | S | ||
| Differential Gear Oil | Rear,210mm RII Axle | 1.70 QTS. | 1.6 L | API - GL-5, SAE 75W-140 Synthetic Gear Oil or equivalent | S | ||
| Differential Gear Oil | Rear,215mm RII Axle | 1.70 QTS. | 1.6 L | API - GL-5, SAE 75W-140 Synthetic Gear Oil or equivalent | S | ||
| Engine Coolant | 6.1L Eng | 15.20 QTS. | 14.38 L | MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent | Includes: heater and coolant recovery tank filled to "max" level. DO NOT mix different types or colors of engine coolant. | S | |
| Engine Oil | 6.1L Eng | w/Filter | 7.00 QTS. | 6.62 L | API - SL/CF, SAE 0W-40 Full Synthetic Engine Oil | For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF. The manufacturer recommends the use of a full synthetic engine oil, such as Mobil 1® SAE 0W-40 or equivalent. | S |
| Fuel Tank | V8 | 19.00 GALS. | 71.92 L | S | |||
| Power Steering Fluid | N/A | N/A | Power Steering Fluid Plus 4, Automatic Transmission Fluid Plus 4 or equivalent | Power Steering Fluid capacities are dependent on Engine/chassis options as well as Steering Gear/Cooler options. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these capacities may vary. | S | ||
| Transfer Case Fluid | 1.30 QTS. | 1.23 L | Transfer Case Fluid - LX | Part No. 05170055EAA, or equivalent. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.