2006 Chrysler Crossfire Base, 2D ConvertibleFACTORY OEM SERVICE PROCEDURE

Fuel Pump Relay: Description

Fig 1: Identifying Relay Control Module, Control Module Box & Fuses
GC0032342Courtesy of DAIMLERCHRYSLER CORP.

The Fuel Pump Relay is housed within the Relay Control Module (1) located inside the Control Module Box (3) in the engine compartment. The Relay Control Module also contains the Fuses (2) for the Fuel Pump Relay circuitry. The relays in the Relay Control Module cannot be adjusted or repaired. If faulty or damaged, the entire module unit must be replaced as an assembly.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.