2005 Chrysler Pacifica LimitedFACTORY OEM SERVICE PROCEDURE

Memory Seat System Operation

Depressing any of the drivers front door trim panel mounted, memory seat switches sends a hardwired, resistor multi-plexed signal to the drivers door module. The door module then sends a PCI data bus message to the Memory Heated Seat/Adjustable Pedal Module (MHSAPM). The module detects the memory seat switch status via the PCI data bus circuit and energizes the appropriate power seat motors. The programmed software in the MHSAPM allows it to know the location of the seat track by a resistance value generated from the seat track mounted potentiometers. When the correct preset location is achieved the module will de-energize the power seat track motors. The MHSAPM will prevent the seat memory recall function from being initiated if the transmission gear selector lever is not in the Park or Neutral positions, or if the vehicle is moving. These inputs are monitored over the PCI data bus circuit.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.