Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Chrysler PT Cruiser Base, 2D Convertible, StandardFACTORY OEM SERVICE PROCEDURE
Fuel Injection: Specifications: Torque
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Air Cleaner Lid Screws | 3.9 | - | 35 |
| Crankshaft Position Sensor Mounting Bolts | 8 | 70 | |
| Engine Coolant Temperature Sensor | 18 | 13.2 | 165 |
| IAC Motor-To-Throttle Body Bolts | 4.5 | 40 | |
| MAP Sensor | 4.5 | 40 | |
| Oxygen Sensor | 28 | 20 | |
| Powertrain Control Module (PCM) Mounting Screws | 4 | 35 | |
| Throttle Body Mounting Bolts | 11.75 +/-4 | - | 105 +/-20 |
| Throttle Body Cable Bracket Bolts | 11.75 +/-4 | 105 +/-20 | |
| Throttle Position Sensor Mounting Screws | 6.2 | 55 | |
| Vehicle Speed Sensor Mounting Bolt | 2.2 | - | 19.4 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.