Quick Lookups: Fluids

2005 Chrysler 300 SRT-8SECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.50 OZS. 0.16 L PAG 46 S
Air Cond Refrigerant 1.63 LBS. 0.73 KG R-134a S
Automatic Transmission Fluid Trans Mfr CD NAG1-W5A580 Overhaul 8.15 QTS. 7.71 L Automatic Transmission Fluid Plus 4 or equivalent Dry fill capacity. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these figures may vary. S
Automatic Transmission Fluid Trans Mfr CD NAG1-W5A580 Service Fill 5.30 QTS. 5.01 L Automatic Transmission Fluid Plus 4 or equivalent S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Front,175mm FIA Axle 0.63 QTS. 0.59 L API - GL-5, SAE 75W-90 Gear Oil or equivalent S
Differential Gear Oil Rear,198mm RII Axle 1.50 QTS. 1.41 L API - GL-5, SAE 75W-140 Synthetic Gear Oil or equivalent S
Differential Gear Oil Rear,210mm RII Axle 1.70 QTS. 1.6 L API - GL-5, SAE 75W-140 Synthetic Gear Oil or equivalent S
Engine Coolant 6.1L Eng 14.80 QTS. 14 L MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Includes: heater and coolant recovery tank filled to "max" level. DO NOT mix different types or colors of engine coolant. S
Engine Oil 6.1L Eng w/Filter 7.00 QTS. 6.62 L API - SL/CF, SAE 0W-40 Full Synthetic Engine Oil Refer to the Engine Oil Fill Cap for the correct SAE grade. S
Fuel Tank V8 19.00 GALS. 71.92 L S
Power Steering Fluid N/A N/A Automatic Transmission Fluid Plus 4 or equivalent Power Steering Fluid capacities are dependent on Engine/chassis options as well as Steering Gear/Cooler options. Depending on type and size of Internal Cooler, length and inside diameter of Cooler Lines, or use of an Auxiliary Cooler, these capacities may vary. S
Transfer Case Fluid 1.30 PTS. 0.61 L Transfer Case Fluid - LX Part No. 05170055EAA, or equivalent. S
Windshield Washer Fluid N/A N/A Windshield Antifreeze Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.