Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chrysler Sebring Base, 2D Coupe, StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.50 OZS. | 0.13 L | PAG 46 | Approximate capacity. | S | ||
| Air Cond Refrigerant | 1.00 LBS. | 0.45 KG | R-134a | Approximate capacity. | S | ||
| Automatic Transmission Fluid | 2.4L Eng,Coupe | 8.10 QTS. | 7.66 L | Automatic Transmission Fluid DIAMOND SP III | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Engine Coolant | 2.4L Eng,Coupe | 7.40 QTS. | 7 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | S | ||
| Engine Oil | Coupe | w/Filter | 4.82 QTS. | 4.56 L | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | S | |
| Engine Oil | Coupe | w/o Filter | 4.50 QTS. | 4.25 L | API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) | S | |
| Fuel Tank | Coupe | 16.40 GALS. | 62.08 L | S | |||
| Manual Transmission Fluid | 2.4L Eng,Coupe | 2.30 QTS. | 2.17 L | API - GL-4, SAE 75W, 85W or 75W-90 | S | ||
| Power Steering Fluid | Coupe | N/A | N/A | Power Steering Fluid Type (MS 9602) | Refer to Chrysler's TSB No. 19-005-03. | S | |
| Windshield Washer Fluid | 2.40 QTS. | 2.27 L | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.