Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chrysler Pacifica AWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | N/A | N/A | R-134a | For further details see "Air conditioner specification label". | S | ||
| Automatic Transmission Fluid | Overhaul | 9.70 QTS. | 9.17 L | Automatic Transmission Fluid Plus 4 or Automatic Transmission Fluid Plus 4 Type 9602 | S | ||
| Automatic Transmission Fluid | Service Fill | 4.00 QTS. | 3.78 L | Automatic Transmission Fluid Plus 4 or Automatic Transmission Fluid Plus 4 Type 9602 | S | ||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | AWD | 1.48 PTS. | 0.7 L | API - GL-5, SAE 75W-90 | S | ||
| Engine Coolant | 10.50 QTS. | 9.93 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | 5.50 QTS. | 5.2 L | API - SAE 5W-30, 10W-30 | S | |||
| Fuel Tank | 23.00 GALS. | 87.06 L | S | ||||
| Power Steering Fluid | 2.50 PTS. | 1.18 L | Power Steering Fluid (MS9602) | Refer to Chrysler's TSB No. 19-005-03. | S | ||
| Transfer Case Fluid | Power Transfer Unit (PTU) | 1.05 QTS. | 0.99 L | API - GL-5, SAE 75W-90 Gear Oil | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.