2004 Chrysler Intrepid SXTFACTORY OEM SERVICE PROCEDURE

Fuel Tank Vent Tube: Installation

  1. Install vent hose and tighten clamp.
  2. Install fuel tank, refer to FUEL TANKΒ .
  3. Install vent hose to fuel filler neck and tighten clamp.
  4. Lower vehicle.
  5. Fill fuel tank and check for leaks.
  6. Connect negative cable to battery.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.