Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Oil Pump, Engine
Oil Pump
Clearance Over Rotors (Max.) 0.077 mm (0 003 in.)
Cover-Out-of-Flat (Max.) 0.025 mm (0.001 in.)
Inner & Outer Rotor Thickness 9.475-9.500 mm (0.3731-0.3741 in.)
Outer Rotor Clearance (Max.) 0.39 mm(0.015 in.)
Outer Rotor Diameter (Min.) 89.175 mm (3.5109 in.)
Tip Clearance Between Rotors (Max.) 0.20 mm (0.008 in.)
Oil Pump to Block Bolts 28 Nm (250 in. lbs.)
Oil Pump Cover Bolts 12 Nm (105 in. lbs.)
Oil Pump Pick Up Tube Bolt 28 Nm (250 in. lbs.)
Clearance Over Rotors (Max.) 0.077 mm (0 003 in.)
Cover-Out-of-Flat (Max.) 0.025 mm (0.001 in.)
Inner & Outer Rotor Thickness 9.475-9.500 mm (0.3731-0.3741 in.)
Outer Rotor Clearance (Max.) 0.39 mm(0.015 in.)
Outer Rotor Diameter (Min.) 89.175 mm (3.5109 in.)
Tip Clearance Between Rotors (Max.) 0.20 mm (0.008 in.)
Oil Pump to Block Bolts 28 Nm (250 in. lbs.)
Oil Pump Cover Bolts 12 Nm (105 in. lbs.)
Oil Pump Pick Up Tube Bolt 28 Nm (250 in. lbs.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.