Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Piston Ring, Engine
Piston Rings
Ring Gap-Top Compression Ring 0.20-0.36 mm (0.008-0.014 in.)
Ring Gap-2nd Compression Ring 0.37-0.63 mm (0.0146-0.0249 in.)
Ring Gap-Oil Control (Steel Rails) 0.25-0.76 mm (0.010-0.030 in.)
Piston Ring Width
Compression Rings-Top and Second 1.47-1.49 mm (0.0579-0.0587 in.)
Oil Ring (Steel Rails) 0.445-0.470 mm (0.0176-0.0186 in.)
Ring Gap-Top Compression Ring 0.20-0.36 mm (0.008-0.014 in.)
Ring Gap-2nd Compression Ring 0.37-0.63 mm (0.0146-0.0249 in.)
Ring Gap-Oil Control (Steel Rails) 0.25-0.76 mm (0.010-0.030 in.)
Piston Ring Width
Compression Rings-Top and Second 1.47-1.49 mm (0.0579-0.0587 in.)
Oil Ring (Steel Rails) 0.445-0.470 mm (0.0176-0.0186 in.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.