Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Procedures
REMOVAL
1. Pull cover, release dips and remove .
2. Remove the bolts and remove the bracket, if necessary.
INSTALLATION
1. If previously removed, install the door bracket and bolts.
2. Install the cover and engage the clips.
SIDE VIEW MIRROR FLAG
REMOVAL - With SPEAKER
1. Open the front door.
2. Remove fasteners attaching the front door flag enclosure cover to the door. Remove speaker from cover, if necessary .
3. Remove fasteners attaching the front door flag enclosure plate to front door, if necessary.
INSTALLATION - With SPEAKER
1. Install fasteners attaching the front door flag enclosure plate to front door.
2. Install speaker to front door flag enclosure cover, if necessary.
3. Install fasteners attaching the front door flag enclosure cover to the door.
Mirror Flag Cover W/O Speaker:
1. Pull cover, release dips and remove .
2. Remove the bolts and remove the bracket, if necessary.
INSTALLATION
1. If previously removed, install the door bracket and bolts.
2. Install the cover and engage the clips.
SIDE VIEW MIRROR FLAG
REMOVAL - With SPEAKER
1. Open the front door.
Mirror Flag Enclosure:
2. Remove fasteners attaching the front door flag enclosure cover to the door. Remove speaker from cover, if necessary .
3. Remove fasteners attaching the front door flag enclosure plate to front door, if necessary.
INSTALLATION - With SPEAKER
1. Install fasteners attaching the front door flag enclosure plate to front door.
2. Install speaker to front door flag enclosure cover, if necessary.
3. Install fasteners attaching the front door flag enclosure cover to the door.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.