Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chrysler Crossfire StandardFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.50 OZS. | 0.13 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.95 LBS. | 0.88 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill | 5.30 QTS. | 5.01 L | Automatic Transmission Fluid approved to MB 236.10, MB 236.12. | Synthetic DEXRON III Transmission Fluid may be substituted. | S | |
| Automatic Transmission Fluid | Overhaul | 8.10 QTS. | 7.66 L | Automatic Transmission Fluid approved to MB 236.10, MB 236.12. | Synthetic DEXRON III Transmission Fluid may be substituted. | S | |
| Brake Fluid | 0.50 QTS. | 0.47 L | DOT 3 Brake Fluid | S | |||
| Differential Gear Oil | Rear | 1.40 QTS. | 1.32 L | SAE 75W-85 Synthetic Gear Oil (MB 231.1) | S | ||
| Engine Coolant | 11.80 QTS. | 11.16 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | Includes: heater and coolant recovery tank filled to "max" level. | S | ||
| Engine Oil | w/Filter | 8.50 QTS. | 8.04 L | API - SAE 0W-40 Synthetic | Only use synthetic engine oils, approved to MB 229.3 or MB 229.5. | S | |
| Fuel Tank | 15.80 GALS. | 59.8 L | S | ||||
| Manual Transmission Fluid | 1.90 QTS. | 1.79 L | Fluid approved to MB 236.2 | S | |||
| Power Steering Fluid | 1.10 QTS. | 1.04 L | Power Steering Fluid (MB345) | S | |||
| Windshield Washer Fluid | 7.40 QTS. | 7 L | Windshield Antifreeze | Not radiator antifreeze. Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.