Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Chrysler Crossfire AutomaticFACTORY OEM SERVICE PROCEDURE
Automatic Transmission DTCS
AUTOMATIC TRANSMISSION DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| P0219 | ENGINE OVERSPEED |
| P0562 | SYSTEM UNDERVOLTAGE |
| P0563 | SYSTEM OVERVOLTAGE |
| P0600 | ABS BRAKE MESSAGE |
| P0600 | ABS CAN MESSAGE INCORRECT |
| P0600 | ABS CAN MESSAGE MISSING |
| P0600 | ABS LEFT REAR SENSOR MESSAGE |
| P0600 | ABS RIGHT FRONT SENSOR MESSAGE |
| P0600 | ABS RIGHT REAR SENSOR MESSAGE |
| P0600 | ACCEL PEDAL SENSOR CAN MESSAGE INCORRECT |
| P0600 | CAN MESSAGE FROM ECM FROM SLA |
| P0600 | ENGINE CAN MESSAGE INCORRECT |
| P0600 | ENGINE CAN MESSAGE MISSING |
| P0600 | ENGINE RPM MESSAGE |
| P0600 | ENGINE TEMPERATURE MESSAGE |
| P0600 | ENGINE TORQUE MESSAGE INCORRECT |
| P0600 | IC CAN MESSAGE INCORRECT |
| P0600 | IC/HVAC CAN MESSAGE MISSING |
| P0600 | SLA CAN MESSAGE INCORRECT |
| P0700 | SENSOR SUPPLY VOLTAGE |
| P0700 | TRANSMISSION SLIPPING |
| P0702 | CONTROL MODULE TCM IS NOT CODED |
| P0702 | INTERNAL CONTROLLER |
| P0702 | INVALID CONTROL MODULE VERSION |
| P0702 | SOLENOID SUPPLY/WATCHDOG |
| P0710 | TRANS TEMP SENSOR SHORTED |
| P0714 | TRANS TEMP SENSOR ERRATIC |
| P0715 | INPUT SENSOR MISMATCH |
| P0715 | INPUT SENSOR OVERSPEED |
| P0715 | N2 INPUT SPEED SENSOR CIRCUIT |
| P0715 | N3 INPUT SPEED SENSOR CIRCUIT |
| P0720 | CAN BUS CIRCUIT |
| P0730 | IMPROPER GEAR |
| P0730 | IMPROPER RATIO |
| P0740 | TCC OVERTEMP |
| P0740 | TCC STUCK ON |
| P0743 | TCC SOLENOID CIRCUIT |
| P0748 | MODULATING PRESSURE SOLENOID CIRCUIT |
| P0753 | 1-2/4-5 SOLENOID CIRCUIT |
| P0753 | 1-2/4-5 SOLENOID CIRCUIT SHORT TO GROUND |
| P0758 | 2-3 SOLENOID CIRCUIT |
| P0758 | 2-3 SOLENOID CIRCUIT SHORT TO GROUND |
| P0763 | 3-4 SOLENOID CIRCUIT |
| P0763 | 3-4 SOLENOID CIRCUIT SHORT TO GROUND |
| P0778 | SHIFT PRESSURE SOLENOID CIRCUIT |
| P0778 | SOLENOID SUPPLY VOLTAGE |
| P0850 | TRANS TEMP SENSOR - P/N SWITCH CIRCUIT |
| P1793 | ENGINE TORQUE REDUCTION |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.