2003 Chrysler PT Cruiser Base, StandardFACTORY OEM SERVICE PROCEDURE

Programming Zone Variation

  1. Using the Variance Zone map, find your geographic location and note the zone number (Fig 1 ).
    Fig 1: Variance Zones Map
    G02663724Courtesy of DAIMLERCHRYSLER CORP.
  2. Turn the ignition switch to the On position. If the compass/temperature data is not currently being displayed, momentarily depress and release the Step push button to step through the display options until you have reached the compass/temperature display.
  3. Depress the Step push button and hold down until the compass mini-trip computer enters the variation adjustment mode and "VAR" along with the current variance zone will appear in the display.
  4. Momentarily depress and release the Step push button to step through the zone numbers, until the zone number for your geographic location appears in the display.
  5. After five seconds, the displayed zone will automatically be set in the compass mini-trip computer module memory and normal operation will resume.
  6. Confirm that the correct directions are now indicated by the compass.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.