Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHRYSLER2003INTREPID SXTREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION (SERVICE INFORMATION)LUBRICATIONCHECKING FLUID LEVELSTRANSAXLE
2003 Chrysler Intrepid SXT
Checking Fluid Levels: Transaxle
2003 Chrysler Intrepid SXTSECTION Transaxle
- Drive vehicle until engine and transaxle are at normal operating temperature. Park vehicle on level surface. Apply parking brake. Turn engine off. Connect scan tool to data link connector. See Fig 1 .
- Start engine. Using scan tool, read transmission fluid temperature. With transmission fluid temperature displayed on scan tool, determine proper fluid level on dipstick. See Fig 2 . Add appropriate type of transmission fluid, if necessary. See RECOMMENDED FLUIDS . DO NOT overfill. Turn engine off, and remove scan tool.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.