Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Positions
Set seat and mirrors to desired position. Press SET button on memory set switch. Press and release desired memory switch button ("1" or "2"). Press and release UNLOCK button on desired RKE transmitter. Do not press any buttons for 10 seconds.
Once transmitters have been programmed, horn chirp can be enabled/disabled by sending horn chirp toggle operation code to BCM. Enable procedure can be performed using scan tool, or by performing procedure in PROGRAMMING HORN ENABLE/DISABLE .
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.