2003 Chrysler Intrepid (CANADA) V6-3.5LFACTORY OEM SERVICE PROCEDURE

Camshaft, Engine

Camshaft
Bore Diameter 43.038-43.059 mm (1.6944-1.6952 in.)
Bearing Journal Diameter 42.939-42.960 mm (1.6905-1.6913 in.)
Diametrical Clearance 0.078-0.12 mm (0 003-0.0047 in.)
(Max.) 0.15 mm (0.0059 in.)
End Play 0.11-0.35 mm (0.004-0.014 in.)
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.