Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2003 Chrysler Intrepid (CANADA) V6-2.7LFACTORY OEM SERVICE PROCEDURE
Piston Pin, Engine
Piston Pins
Type Full Floating
Pin Diameter 21.997-22.000 mm (0.8661-0.8662 in.)
Clearance in Piston 0.005-0.013 mm (0.0002-0.0005 in.)
Clearance in Rod 0.007-0.018 mm (0.0003-0.0008 in.)
Type Full Floating
Pin Diameter 21.997-22.000 mm (0.8661-0.8662 in.)
Clearance in Piston 0.005-0.013 mm (0.0002-0.0005 in.)
Clearance in Rod 0.007-0.018 mm (0.0003-0.0008 in.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.