FLUID CAPACITIES

Application

⁽¹⁾ Quantity

Automatic Transaxle ⁽²⁾

Drain & Refill

⁽³⁾ 4.5 Qts. (4.3L)

Dry Refill

9.3 Qts. (8.8L)

Cooling System ⁽⁴⁾

2.7L

10.5 Qts. (10.0L)

3.5L

11.0 Qts. (10.5L)

Crankcase (Includes Filter) ⁽⁵⁾

5.0 Qts. (4.7L)

Differential ⁽⁶⁾

.78 Qt. (.74L)

Power Steering Fluid ⁽⁷⁾

⁽⁸⁾

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Use Mopar(R) ATF+4, Type 9602.

⁽³⁾	Estimated service refill capacity.

⁽⁴⁾	Quantity includes heater and coolant recovery tank.

⁽⁵⁾	Use an API energy conserving engine oil that is certified for gasoline engines. Use 5W-30 or 10W-30.

⁽⁶⁾	Differential has a separate sump from the automatic transaxle. Use Mopar(R) 75W-90 hypoid gear oil. DO NOT use synthetic gear oil in differential. The 42LE Differential uses Mopar(R) 80W-90 hypoid gear lubricant.

⁽⁷⁾	Use only Mopar(R) power steering fluid. DO NOT use automatic transmission fluid.

⁽⁸⁾	Capacity is not available from manufacturer.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Engine Controls - Service & Adjustment Specifications: Capacities