2002 Chrysler Voyager ECFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/o Rear AC 5.00 OZS. 0.14 L PAG 46 S
Air Cond Compressor Oil w/Rear A/C 7.40 OZS. 0.21 L PAG 46 S
Air Cond Refrigerant Front & Rear 2.85 LBS. 1.29 KG R-134a S
Air Cond Refrigerant Front 2.10 LBS. 0.95 KG R-134a S
Automatic Transmission Fluid 4.00 QTS. 3.78 L Automatic Transmission Fluid Plus 4 or Automatic Transmission Fluid Plus 4 Type 9602 S
Brake Fluid N/A N/A DOT 3 Brake Fluid If DOT 3 Brake Fluid is not available, then DOT 4 or DOT4+ is acceptable. S
Engine Coolant 2.4L Eng 11.40 QTS. 10.78 L 50/50 mixture of Ethylene Glycol Antifreeze and water Includes: heater and coolant recovery tank filled to "max" level. S
Engine Oil 2.4L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 5W-30 (Below 32Deg.F), 10W-30 (Above 0Deg.F) S
Fuel Tank 20.00 GALS. 75.7 L S
Power Steering Fluid VIN Position 11, B = St. Louis Built before June 4, 2001 N/A N/A Power Steering Fluid (MS5931) Refer to Chrysler's TSB No. 19-005-03. Part No. 04883077. S
Power Steering Fluid VIN Position 11, B = St. Louis Built June 4, 2001 or later N/A N/A Automatic Transmission Fluid Plus 4 (MS9602) Refer to Chrysler's TSB No. 19-005-03. Part No. 05013457AA. S
Power Steering Fluid VIN Position 11, R = Windsor Built before May 22, 2001 N/A N/A Power Steering Fluid (MS5931) Refer to Chrysler's TSB No. 19-005-03. Part No. 04883077. S
Power Steering Fluid VIN Position 11, R = Windsor Built May 22, 2001 or later N/A N/A Automatic Transmission Fluid Plus 4 (MS9602) Refer to Chrysler's TSB No. 19-005-03. Part No. 05013457AA. S
Windshield Washer Fluid N/A N/A Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.