Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chrysler Voyager ECFACTORY OEM SERVICE PROCEDURE
Charging System: Charging: Specifications: Torque
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Battery Hold Down Clamp Bolt | 20 | 14.7 | 180 |
| Generator B+ Nut | 12.4 | 9.2 | 110 |
| Battery Terminal Nut | 4 | 35 | |
| Generator Mounting Bolt 2.4L | 28.2 | 20.8 | 250 |
| Generator Mounting Bolts 3.3/3.8L | 54.2 | 40 | |
| Starter Solenoid Battery Nut 3.3/3.8L | 11.3 | 8.3 | 100 |
| Generator Decoupler | 109.8 | 81 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.