Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Chrysler Intrepid R/TFACTORY OEM SERVICE PROCEDURE
Electrical Component Locator: Switches
SWITCHES LOCATION
| Component | Location |
|---|---|
| Brake Fluid Level Switch | In master cylinder fluid reservoir. |
| Engine Oil Pressure Switch (2.7L) | On right side of engine. See Figure. |
| Engine Oil Pressure Switch (3.5L) | On right side of engine. |
| Multi-Function Switch | At top of steering column. |
| Park Brake Switch | On parking brake lever. |
| Seat Belt Switch | In left "B" pillar. |
| Stoplight Switch | At top of brake pedal. |
| Transmission Solenoid/Pressure Switch Assembly | On top side of transaxle valve body. |
| Turn Signal/Hazard Switch | Integral to multi-function switch. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.