2002 Chrysler Intrepid BaseFACTORY OEM SERVICE PROCEDURE

Input Clutch Assembly: Assembly

Use petrolatum on all seals to ease assembly of components.

  1. Using an arbor press, install input shaft to input shaft hub. See Fig 1.
    Fig 1: Installing Input Shaft
    G00991790Courtesy of DAIMLERCHRYSLER CORP.
  2. Install input shaft snap ring. See Fig 2.
    Fig 2: Installing Input Shaft Snap Ring
    G00991791Courtesy of DAIMLERCHRYSLER CORP.
  3. Using an arbor press and Tool 6057, Install OD/Reverse piston return spring and snap ring. See Fig 3 and Fig 4 .
    Fig 3: Installing Return Spring & Snap Ring
    G00991792Courtesy of DAIMLERCHRYSLER CORP.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.