WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

A single 12-volt battery is standard factory-installed equipment on this model. All of the components of the battery system are located in the front of the vehicle, just in front of the right front wheel and tire assembly. The battery system for this vehicle covers the following related components, which are covered in further detail later:

Battery - The storage battery provides a reliable means of storing a renewable source of electrical energy within the vehicle.
Battery Cables - The battery cables connect the positive and negatively charged battery terminal posts to the vehicle electrical system.
Battery Holddown - The battery holddown hardware secures the battery in the battery tray in the engine compartment.
Battery Heater Blanket - The battery heater blanket is used to improve battery cold start ability.
Battery Tray - The battery tray provides a secure mounting location in the vehicle for the battery and an anchor point for the battery holddown hardware.

For battery system maintenance schedules and/or jump starting procedure, refer to the owners manual. The battery must be fully-charged before any battery system diagnosis or testing procedures can be performed.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Battery System: Description

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?